The Basics of a Typical Oil-Fired Heating System

If you’re reading this article, there’s a good chance that you’re seriously contemplating on installing an oil-fired heating system in your newly constructed home. Well, there’s no blaming you for that because a lot of homeowners also use some kind of heating system that uses oil and rely on Allentown oil delivery services to buy the precious commodity; and the primary reason is because this type of heating source is considered as the most reliable of all, even though it isn’t the newest or the most sophisticated.

Generally speaking, oil fired-heating systems distribute heat inside the living space in three unique ways. These are warm air through vents, hot water via baseboards, and stream by way of radiators. Whatever the type you intend to install in your home, keep in mind that they each have their distinctive set of advantages and benefits.

The thermostat that’s included in the installation of the heating system will be responsible for sensing room temperature; this capability will be used to figure out if the temperature has actually fallen below your desired temperature setting. And when that happens, the same thermostat will be sending a signal to the heating system, in the process telling it to provide more heat to warm up the living space.

The moment the oil burner is engaged, heating oil will begin its travel, starting from the tank to the burner via a pump, where it will then be converted into a fine mist combined with air. This mixture of fuel oil and air will be the ideal substance to be injected into the burner. At this point, it will be ignited in the combustion chamber and the heating begins.

Keep in mind that the heating system will work in a different way, depending primarily on the type of system you opt to install at home - whether it is water-based or warm air. For water-based systems, there are basically two major types, namely hot water systems and steam systems. Water will be heated using two primary types of boilers; a steel version and a traditional cast iron type. Once water is heated, it will then be dispersed throughout the living space.

As for a hot water system, the heated water will be circulated via radiators and/or baseboards. For a steam system, the water will turn into stream first, rises through the pipes and then to the radiators. In the warm air system type, the furnace will be heating the air. Meanwhile, a blower sends that heated air up through the ducts and out of the vents situated in the walls or underneath the flooring. The air will then be drawn back to the furnace via a return duct, and after this, the entire cycle repeats itself. The emissions or byproduct of the combustion of fuel and air will finally exit the system through a flue pipe, which by the way is connected to the chimney.

So, that is how your typical oil-fired heating system works, and by this time, you already have a clearer understanding to make that crucial decision for your new home.